Oct 17, 2021     Bulkheads - (4.1 hours)       Category: Fuselage

Fabbled Rudder Cable Pulley assemblies and fabricated alum bushings for mounting to S-8. Riveted doubler on S-8. Cleaned, deburred and clecoed doubler to S-9 and prepped lower attach fitting for install. NOTE: If you are building a taildragger version, be sure to see note on S-8, S-9 parts page to substitute and install the 4 tangs in place of the washers in the main rudder cable pulley mount. These will connect to the tailwheel steering cables. They are located in the landing gear hardware parts bag (the one with the tailwheel spring in it). It took some searching to find them-- thought I'd save you some time.